41300 Loop powered sounder

Loop powered indoor sounder

Part Number
41300
  • Approved – EN54-3 and EN54 part 23
  • Built-in Short Circuit Isolator and EN54-17 certified
  • Powered from the same fire detection loop
  • High-Intensity White Flash
  • 32 tones plus a selectable override tone
  • Deep-Base IP65 versions
  • Unique twist and lock bayonet mounting system

BD 28.480

Availability: 11 in stock

Lowest Price

The VELOX 41000 Addressable range of Sounder Beacons with state of-the-art microprocessor-controlled technology, are fully loop powered from the range of VELOX fire alarm control panels. The new range of 41000 devices are fully addressable by VELOX range of control panels, provided with in-built isolators to enhance reliability. The new 41000 range of devices Approved to EN54-3, EN54-23 and EN54-17. The Loop Powered devices of the 41000 series can be connected and powered from the VELOX 2Km loop length using 1.5mm² cable. All the 41000 range of devices are loop powered, which means cost effective wiring, and easy to install on the same fire detection loop. This exceptional feature shall drop the cost dramatically, especially in an application like Hotels and Malls were many beacons or sounder-beacons are required to be installed on the same fire alarm loop. Automatic addressing is an added benefit to the many others of VELOX technology, where the fire alarm control panel sequentially addresses each device and makes sure that no duplicate addresses are allowed. Furthermore, when needed to assign an address in a non-sequential fashion, the manual programming via the VELOX detector programming tool is utilised. The VELOX clients enjoy five years warranty on all the VELOX devices. An extra added advantages when installing the VELOX range of products.

Scroll to Top